Had originally decided to use my 24" monitor as the primary display to run my L/R DDIs, UFCP and also the MPCD.
While working on the mock up pit, I realized that 24" monitor doesn't have adequate real estate to accommodate all four instrument panels.
So decided to order myself another 8" touch panel along with touch screen to fabricate the UFCP (Up Front Control Panel).
Instead of purchasing a ready-made monitor, I also decided to purchase a 'kit'. A kit will provide me with flexibility to fabricate my own UFCP.
The 'kit' arrived a couple of days back.
Boxed kit as it arrived
During the ordering process, I had indicated to the vendor that I need this kit in a little hurry. He made sure the complete postal department understood the need for V(ery).V(ery).Most Urgent need.
Opening the box
I had ordered a 'power adaptor' separately, I see that they have remembered to pack it along
Unpacking the 'board'
'USB Touch Controller' board on the left side and touch monitor packed on the right side
A close up shot, to document any damages during transit. The 'stand-by' micro-switch button is damaged. But, it's nothing that I can't fix myself
Driver CD is enclosed, also
USB touch controller board
Complete assembly. The 'ribbon' cables are notoriously fickle and need to be handled VERY carefully, lest they get damaged. VGA display connector (blue) is visible in the left-centre of the display controller board.
The size of the monitor is just about correct to make a 'handsome' UFCP.
I'm now excited to rig this up.
If only I can get a little more time on my hand.